SSC JE Exam Analysis & Questions Asked Paper-I: 22nd January 2018
SSC JE Exam 2018 is scheduled to held from 22nd January to 29th January 2018 to recruit most eligible candidates for the post of Junior Engineers in Civil, Electrical & Mechanical department. The exam today was conducted in 3 shifts.
Check the SSC JE Analysis of All Shifts for Paper – I and know about the types of questions asked from different sections, good attempts and difficulty level of the exam. Before that take a look at the SSC JE Paper – I Exam Pattern.
SSC JE Exam Pattern 2017-18
| Papers | Subject | No. of Qs. | Max Marks | Time |
Paper-I
Objective Type
|
(i) General Intelligence
& Reasoning
|
50
|
50
|
2 Hours
per shift
|
(ii) General Awareness
|
50
|
50
|
||
(iii)
Part –A Civil &Structural
OR
Part-B Electrical
OR
Part-C Mechanical
|
100
|
100
|
SSC JE Analysis 22nd January 2018 – Paper I
SSC JE Analysis – General Intelligence & Reasoning
This section was overall easy to moderate. Questions were asked on the following topics:
- Syllogism: 2 Qs
- Analogy: 1-2 Qs
- Alphabetical Sequence: 2-3 Qs
- Missing Character: 2-3 Qs
- Odd one Out: 8-9 Qs
- Direction & Distance: 2 Qs
- Water Image: 1-2 Qs
- Alpha Numeric Series: 3-4 Qs
- Blood Relation: 2-3 Qs
- Alphabetical Coding: 5 Qs,
- Number Series: 5 Qs
- Analogy: 3-4 Qs
- Miscellaneous: 6 Qs
SSC JE Analysis – General Awareness
- Current Affairs: 5-7 Qs
- History-based questions
- Science-based questions
General Awareness Questions asked in SSC JE:
- Who won the Davis Cup 2017?
- Which country will host summer Olympics 2028?
- What is the difference between convex and concave lens?
- What is myopia?
- What is Hypermetropia?
SSC JE Analysis – Electrical
- Thevenin & Norton: 2 Qs
- Voltmeter/ Ammeter: 1-2 Qs
- Illumination: 2-3 Qs
- Power System: 10 Qs
- Network Theory: 15-20 Qs
- Electrical Emission: 15-20 Qs
- Measurements: 15-20 Qs
- Magnetic Circuits: 3-4 Qs
- Resonance & Frequency: 10 Qs
- Finding Current in Different Branches: 2-3 Qs
- Bridges: 2 Qs
- Storage Factor: 1 Qs
- Electronics: 10 Qs
- Resistance Colour Coding: 1-2 Qs
Questions asked in SSC JE Electrical Exam :
- Q. What is the Unit of Reluctance?
- Q. Finding the equivalent resistance?
- Q. What is the ideal condition for max power transfer?
- Q. Define Superposition Theorem?
- Q. Define Galvanometer?
- Q. What do you mean sharing bridge?
80% of the paper was theory based and 20% was numerical based.
SSC JE Analysis – Mechanical
- Thermo Dynamics: 10 Qs
- Fluid and Mechanics: 20 Qs
- Production & DME: 15 – 20 Qs
- Strength of Material: 10 – 15 Qs
- Topics:
- Supercharging
- Irreversibility
- Carnot Engines
- Limit & Tolerance
- Capillary Rise Coefficient
- Viscous and Non-viscous Fluids
- Otto, Diesel & Dual cycles
Questions asked in SSC JE Mechanical Exam :
- Q1. Density of water is maximum at which temperature?
- Q2. What happens due to excess quantity of sulfur in diesel engine?
- Q3. Rotary IC engine is the inversion of ?
- Q4. What happens if more carbon deposits on the piston of cylinder?
- Q5. In manometer, better liquid combination is having higher viscosity or lower viscosity?
- Q6. Chezy equation is used in case of?
- Q7. In the PV diagram, triple point is a line or point?
- Q8. What is the relation which represents Mollier diagram?
- Q9. Determine the tensile stress, if the axial load is 10 KN and the dimensions are 20mmx20mm
- Q10.What will be the capillary rise at 20 C in a clean glass having 1mm bore?
- Q11.What is the radial distance of tooth from pitch circle to top of the tooth?
- Q12.MSST was given by?
- Q13.Which of the conditions represent steady uniform flow?
- Q14.Which of the relations represent irreversible and impossible flow?
- Q15.What is the upward force on a submerged body in a liquid called?
- Q16.What will be the BMD in case of a UVL acting on a cantilever beam (zero at free end)?
- Q17.At what pressure properties of water and steam become identical?
- Q18.Due to friction lining wear varies as?
- Q19.Which of the equation defines enthalpy
- a. U + pv/E
- b. U + EPV
- Q20.What is the ratio of actual dimension and theoretical dimension called?
- Q21.Fluid in equilibrium cant sustain which of the following?
- Q22.In a blur body, what is the condition between pressure drag and friction drag?
- Q23.Rankine theory represents?
- Q24.Which of the following state is observed after material gets work hardened?
- Q25.What is the properties of material called through which it regains its original shape?
- Q27.Which of the following governor has pendulum attached to its sleeve?
- Q28.What is the rate of change of moment of momentum called
- Q29.What is dryness fraction ?
- Q31.What is the slope called in case of Mollier diagram
- Q32.Which state is obtained after the mechanical operation Austempering?
- Q33.Which process can be used in place of isothermal process at atmospheric process?
- Q34.If the COP of the refrigerator is 5, then find the efficiency of the corresponding heat engine?
- Q35.How is the size of cam determined?
- Q36.What is the pressure distribution in case of Uniform Wear Theory?
- Q37.What is the stream lines if U = ax and V = by
- Q38.Preheating in welding is done in which of the following matter?
- Q39.Which of the following fluid offers no resistance?
- Q40.What is the Mean Effective Pressure in case of Otto cycle..(some data)?
- Q41.Find out the efficiency of the Otto Cycle (some data)?
- Q42.Find out the angular acceleration of the flywheel (some data)?
- Q43.Which among diesel engine and petrol engine is more efficient having same compression ratio and same heat added?
- Q44.What is the equivalent length of the bar in case of both ends fixed?
- Q45.Find out the contact ratio?
- Q46.What is the relation between Claussius inequality and Kelvin statement in second law of thermodynamics?
The overall paper consisted 15% of numerical problems and 80-85% theory based.
If you have know more questions from SSC JE Paper I Exam on 23rd January 2018, share them in the comment section.
Thanks
Team aimsuccess.in
